Print

Sam Broadcaster

Written by Saii Hallard. Posted in Streaming Software

 

1) Download and install SAM Broadcaster from http://www.spacialaudio.com/?page=downloads

2) Dowload "SHOUTcast DSP Plug-In for Winamp" from http://www.shoutcast.com/download/

3) Start SAM Broadcaster and go to: File -> Config -> Audio Mixer Pipeline and select the DSP for the deck of your choice. (Click on the DSP button). Click on Refresh List Button, the Nullsoft SHOUTcst Source DSP vx.x.xb should appear on the list, select a check mark there.

4) The SHOUTcast Source DSP applet should open. Click on the Encoder tab and select the Bit Rate at which you would like to broadcast, this would be the Bit Rate of the server you have rented or setup yourself.

See: How to configure the SHOUTcast plugin DSP (winamp) for more info about the DSP

5) Select the Output tab and input your login information: Address: Port: Password:

6) Click on the connect button and you will be connected and ready to broadcast. You can also refer to the SAM Broadcaster documentation for more information.